Fujitsu SPARC Enterprise T5220 Service Manual page 37

The following table provides descriptions of these controls and indicators.
Front Panel Controls and Indicators (SPARC Enterprise T5120 and T5220 Servers)
TABLE:
LED or Button Icon or Label
Locator LED
and button
(white)
Service
Required LED
(amber)
Power OK
LED
(green)
Power button
Power Supply REAR
Fault LED
PS
(amber)
Overtemp LED
(amber)
Fan Fault LED TOP
(amber) FAN
Description
The Locator LED can be turned on to identify a particular system. When on, it
blinks rabidly. There are three methods for turning a Locator LED on:
• Issuing the ILOM command set /SYS/LOCATE value=Fast_Blink
• Issuing the ALOM CMT command setlocator on.
• Pressing the Locator button.
If on, indicates that service is required. POST and ILOM are two diagnostics
tools that can detect a fault or failure resulting in this indication.
The ILOM show faulty command provides details about any faults that cause
this indicator to light.
Under some fault conditions, individual component fault LEDs are lit in
addition to the system Service Required LED.
Provides the following indications:
• Off – System is not running in its normal state. System power might be off.
The service processor might be running.
• Steady on – System is powered on and is running in its normal operating
state. No service actions are required.
• Fast blink – System is running in standby mode and can be quickly returned
to full function.
• Slow blink –A normal, but transitory activity is taking place. Slow blinking
might indicate that system diagnostics are running, or the system is booting.
The recessed Power button toggles the system on or off.
• Press once to turn the system on.
• Press once to shut the system down in a normal manner.
• Press and hold for 4 seconds to perform an emergency shutdown.
Provides the following operational PSU indications:
• Off – Indicates a steady state, no service action is required.
• Steady on – Indicates that a power supply failure event has been
acknowledged and a service action is required on at least one PSU.
Provides the following operational temperature indications:
• Off – Indicates a steady state, no service action is required.
• Steady on – Indicates that a temperature failure event has been acknowledged
and a service action is required.
Provides the following operational fan indications:
• Off – Indicates a steady state, no service action is required.
• Steady on – Indicates that a fan failure event has been acknowledged and a
service action is required on at least one of the fan modules.
Identifying Server Components 11