Connecting The Interface Cable - Fujitsu DL3800 User Manual

SETTING UP
2-20

Connecting the Interface Cable

To connect the interface cable:
1. Turn off both the printer and the computer.
2. Pushing the top of the shutter on the right side of the printer by
the thumb, lift the bottom of the shutter by fingers until the
shutter stays open to access the connector.
3. Attach the interface cable to the connector. If your printer has a
dual interface, use the appropriate connector.
Clip
Connecting the interface cable
Shutter
Opening the shutter
Parallel
Groove for
holding
cable
Serial
User's Manual