SETTING UP
2-24
Selecting a USB Cable
When the USB interface is used to connect to the host computer,
the parallel interface and the serial interface (factory add-on
option) cannot be connected simultaneously.
The USB interface does not guarantee all connections of USB-
supported devices.
Selecting a LAN cable
When the LAN card is installed, simultaneous connection with
the USB interface is not possible. If a USB cable is connected,
the LAN interface is disabled.
The LAN cable, when used in 100BASE-TX environments,
must conform to category 5 or higher.
Connecting the Interface Cable
To connect the interface cable:
1. Turn off both the printer and the computer.
2. Attach the interface cable to the connector. Do not connect more
than one interface cable type to the printer at the same time.
Connecting the interface cable
User's Manual