Fujitsu DL3800 User Manual page 46

SETTING UP
<<FUNCTION>>
SAVE&END MENU1
V-ALMNT
<EMULATE> DPL24C+
2-24
3. Select the MENU1 function.
Locate the red cursor on the plastic print guide. Initially, this
cursor should be positioned under SAVE & END at the begin-
ning of the <<FUNCTION>> menu. Press the LOCK button
repeatedly to position the red cursor beneath MENU1, as shown
below:
MENU2 H ADJUST
Press the FONT button or the MENU button to select MENU1
and print the following <EMULATE> options:
XL24E ESC/P2
The currently selected emulation is indicated by a short under-
line. In the figure shown above, the Fujitsu DPL24C PLUS
emulation is selected.
4. Select an emulation.
Press the LOCK button repeatedly to position the red cursor
under the required emulation. Press the FONT button to select
the emulation and print the next MENU1 item.
CONFIG DEFAULT LIST
Press the LOCK button to
position
the red cursor.
SELF-TST HEX-DUMP
User's Manual