Table of Contents
Advertisement
PRINTER MODELS AND
OPTIONS
vi
ABOUT THIS MANUAL
Thank you for buying the Fujitsu DL3700 Pro/3800 Pro dot matrix printer.
You can expect years of reliable service with very little maintenance.
This manual explains how to use your printer to full advantage. It is
written for both new and experienced printer users.
This manual describes how to install, set up, and use your printer and
printer options. It also explains how to keep the printer in good
working condition and what to do should something go wrong.
Detailed procedures are provided for first-time users. Experienced
users can skip some of the details, using the table of contents and
chapter introductions to locate information.
This manual has several appendixes, a glossary, and an index.
Appendix A lists supplies and additional documentation and
information available from your dealer or authorized Fujitsu
representative. Fujitsu offices are listed at the end of the manual.
This manual covers model DL3700 Pro, an 80-column printer, and
model DL3800 Pro, a 136-column printer. Each model has a 100-120
VAC or 220-240 VAC power supply. A serial interface is a factory
add-on option. You must specify these when purchasing the printer.
Other options include a cut sheet feeder and a color print feature,
both of which can be added by yourself after purchasing the printer.
Unless otherwise stated, the information given here applies to both
models. However, illustrations are of either model.
DL3700 Pro/3800 Pro
Basic specifications
Print line at 10 cpi: 80 columns (DL3700 Pro)
Interface: Centronics parallel
Alternative specification
Power supply: 100–120 VAC or 220–240 VAC
Factory add-on option
RS-232C serial interface
User add-on options
Cut sheet feeder
Color printing feature
cpi: characters per inch
136 columns (DL3800 Pro)
User's Manual
Advertisement
Table of Contents
