Fujitsu DL3800 User Manual page 18

QUICK REFERENCE
: Operation can be performed when the printer is in this state.
— : Operation cannot be performed when the printer is in this state.
N/A : Does not apply.
Operation
Clear print buffer
Eject single sheets
Enter normal mode
Enter setup mode
Exit to normal mode
Form feed (forward)
Ignore font commands from CPU
Line feed (forward)
Load paper
Micro feed (backward)
Micro feed (forward)
Place printer offline
Place printer online
Reset power-on defaults
Resume printing after paper end
Save adjusted load positions
Select a font (and pitch)
Select MENU1 or MENU2
Start/stop/resume printing
Self-test printing
Tear off forms
(rear-fed continuous forms only)
Unload paper to park position
(rear-fed continuous forms only)
QR-2
Printer Operations (Normal Mode)
Online Offline
— Press LOCK and FONT.
Press LF/FF.
Turn printer on. (Press I on the power switch.)
N/A N/A
— Press FONT and MENU.
— Press ONLINE, then press FONT or MENU.
Press and hold LF/FF until the operation starts.
— Press LOCK.
Press LF/FF within three seconds.
Press LOAD.
— Press ONLINE and TEAR OFF.
— Press ONLINE and LF/FF.
— Press ONLINE.
— Press ONLINE.
Turn printer off, then on.
— Press ONLINE.
— Press ONLINE and LOAD.
— Press FONT.
— Press MENU.
Start: Send print command.
Stop/resume: Press ONLINE.
Start: Turn printer off. Press LF/FF while
turning printer on.
Pause/resume: Press FONT or MENU.
Exit: Press ONLINE.
Press TEAR OFF. Tear off forms, then
press any button to retract forms.
Press LOAD.
Required Response
User's Manual