Setup Mode Example - Fujitsu DL3800 User Manual

USING SETUP MODE
5-6
To select an option from the <item> menu:
1. Repeatedly press the LOCK button to position the red cursor
on the plastic print guide under the option you require.
2. Press the FONT button to select the option. The printer prints
the next item and its options. You can press MENU to select
the option. Then, the printer prints the previous item and its
options.
3. After selecting the desired options, press the ONLINE button
to reprint the <<FUNCTION>> menu.
For each item, the short-underlined option is the current
default option (the option currently saved in the printer's
permanent memory). In the previous example, the default
options are Fujitsu DPL24C PLUS emulation, Courier 10 font,
and letter print quality.
The chart on the next page summarizes how to select options such
as emulation, font, and print quality and how to use functions that
do not have options.

Setup Mode Example

To become familiar with setup mode, try the following example. This
example shows how to change the font and pitch in MENU2 to
Prestige Elite 12 and 12 cpi.
1. Load continuous forms paper.
2. Enter setup mode.
Press the FONT and MENU buttons simultaneously until the
printer beeps.
3. Select the MENU2 function.
Wait for the printer to stop printing and press the LOCK
button twice to position the red cursor on the print guide
under MENU2. Press the FONT button or the MENU button
to select the MENU2 function and print the <EMULATE> item
and its options.
User's Manual