Printer Failures - Fujitsu DL3800 User Manual

TROUBLE-SHOOTING
7-10

Printer Failures

A user cannot generally resolve a problem involving defective printer
hardware. On detecting a fatal error, the printer will:
• Stop printing
• Beep four times
• Turn the ONLINE indicator off
• Blink the PAPER OUT indicator (with a FONT indicator lit
indicating the error type).
Table 7.4 Printer Failures
Error
+34 V undervoltage error
Left end sensor error
Overload printing error
RAM error
The following errors cause the printer to turn off the power:
• Print head error
• Space motor error
• Line feed motor error
• +34 V overvoltage error
No error condition is displayed if any of these errors occurs.
Turn the printer off and back on, then rerun the same job to check if
the error was transient. If the error recurs, contact your dealer.
FONT indicators lit
COUR10
PRESTG12
COMP17
Bold PS
User's Manual