Selecting A Usb Cable; Selecting A Lan Cable; Connecting The Interface Cable - Fujitsu DL7400 User Manual
24-wire dot matrix printer
Hide thumbs
Also See for DL7400:
- Quick start manual (1 page) ,
- Installation manual (46 pages) ,
- Maintenance manual (159 pages)
Table of Contents
Advertisement
User's Manual
Selecting a USB Cable
When the USB interface is used to connect to the host computer,
the parallel interface and the serial interface (factory add-on
option) cannot be connected simultaneously.
The USB interface does not guarantee all connections of USB-
supported devices.
Selecting a LAN cable
When the LAN cable is connected, the parallel and USB cables
cannot be used.
The LAN cable, when used in 100BASE-TX environments,
must conform to category 5 or higher.
Connecting the Interface Cable
To connect the interface cable:
1. Turn off both the printer and the computer.
2. Attach the interface cable to the connector. Do not connect more
than one interface cable type to the printer at the same time.
Connecting the interface cable
SETTING UP
2-21
Advertisement
Table of Contents
