User's Manual
Table 7.3 Operating Problems and Solutions (Cont.)
Problem
The printer is on
If you are using an RS-232C serial interface,
but it will not
make sure that the serial settings required by
print (continued). your software or computer are the same as the
settings on the printer. See the section Chang-
ing Hardware Options in Chapter 5.
The cut sheet
Make sure that the cut sheet feeder is firmly
feeder does not
mounted on the printer.
operate.
Open the front cover and make sure that the
third stud from the left on the printer bottom
frame projects.
The double-bin
Make sure that the double-bin adapter is firmly
adapter does not
mounted behind the cut sheet feeder.
operate.
Open the front cover and make sure that the
fourth stud from the left on the printer bottom
frame projects.
TROUBLE-SHOOTING
Solution
7-9