Connecting To The Serial Port; Connecting The Serial Interface Cable - Fujitsu PrintPartner 12V User Manual

User' s Manual

Connecting to the Serial Port

Connecting to the serial port involves the following tasks:
Connect the interface cable to the printer and your computer.
l
Print out the status report to check the serial parameter settings.
l

Connecting the Serial Interface Cable

To connect to the serial interface port, you need a cable correctly
wired for this printer and your computer. The cable must also have
the proper connectors. Your dealer or technical support person can
supply you with the proper cable.
The serial interface of this printer requires a null-modem cabIe with a
male D-SUB 9-pin connector at the printer side. Refer to your
computer documentation for the type of connector required by its
serial port.
Caution:
Be sure that the printer is turned off before connecting the interface
cable.
Do not touch any connector contacts to avoid possible electrostatic
damage to the printer.
Connecting the Printer to Your Computer
To make the connection,
plug the cable connector
into the parallel interface
port on the back of the
printer. Secure the
connector with the wire
clips. Plug the other
connector into your
computer' s parallel port.
Consult your computer
documentation if you need
help.
1-15