Table of Contents
Advertisement
SELECTING PAPER
User's Manual
PAPER HANDLING
This chapter explains how your printer uses paper.
Topics covered are:
• Selecting paper
• Overview of paper operations
• Adjusting for paper thickness
• Using single sheets
• Using continuous forms (push-tractor feed and pull-tractor
feed)
• Feeding and positioning paper
• Switching paper types
Tips for paper handling are given at the end of this chapter. Check that
section if you are using multipart forms, envelopes, or labels.
The printer can handle either single sheets or continuous forms. Single
sheets, also called cut sheets, include envelopes and noncontinuous,
multipart forms. Continuous forms include labels and multipart forms
fed into the printer using the forms tractors.
For best results, use paper that meets the specifications listed below. (See
Appendix B for detailed specifications.) If you are unsure of the suitabil-
ity of a particular paper, try testing the paper or consult your dealer.
Length
80
Single sheets: 76 to 364 mm (3 to 14.3 in)
columns
Continuous forms: 102 mm (4 in) or greater
136
Single sheets: 76 to 420 mm (3 to 16.5 in)
columns
Continuous forms: 102 mm (4 in) or greater
Width
80
Single sheets: 102 to 267 mm (4 to 10.5 in)
columns
Continuous forms: 102 to 267 mm (4 to 10.5 in)
136
Single sheets: 102 to 420 mm (4 to 16.5 in)
columns
Continuous forms: 102 to 420 mm (4 to 16.5 in)
Thickness
0.35 mm (0.014 in) maximum total thickness.
Copies
1 to 5 copies, including the original.
For carbon-interleaved paper, the carbon
counts as a copy.
PAPER HANDLING
3
3-1
Advertisement
Table of Contents
