Fujitsu DL3800 User Manual page 108

USING SETUP MODE
5-20
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
MENU1 and
Options
MENU2 Items
<LFT-END>
## COLM
<TOP-MRG>
## LINE
Description
Specifies the print start column for
changing the left margin. Printing
starts at the position given by this
column plus your software-specified
left margin.
Column 1, 2, 3, ..., 41
Specifies the number of space lines
for the top margin. The resultant
blank space is the <TOP-MRG>
setting minus 1 line.
The total size of your top margin is the
above resultant value plus the following
two settings: top-of-form (default = 1
inch) and the software-specified top
margin. If you are using software to
specify the top margin, use the
default (1 line) for <TOP-MRG>.
1, 2, 3,4, 5, 6, 7, 8, 9, or 10 lines
LET-END
Software-
specified
margin
Top-of-form
Top margin
setting
User's Manual