Table of Contents
Advertisement
User's Manual
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Items Options
<AREACNT>
ENABLE
DISABLE
<ON-LOAD>
OFFLINE
ONLINE
<LOCK>
NONE
SETUP
ALL
<//S//>
DISABLE
ENABLE
USING SETUP MODE
Description
Area-over detection control.
Detects the left and right edges of
paper when loading the paper.
The printer does not print data
beyond the edges, but turns on the
AREA OVER indicator.
Does not detect the edges. Select
this option when you are using
colored or preprinted paper.
Printer status after loading paper in
offline mode.
Remains offline after paper loading.
Goes into online after paper loading.
Lock function of setup mode.
Enables all buttons on the control
panel.
Disables the setup-related buttons
to keep the printer from entering
setup mode during the offline state.
Disables the setup-rlated buttons
and the LOCK, FONT, and MENU
buttons.
Effectiveness of the Cut Sheet
Selection command (//S//).
Makes the command ineffective.
Makes the command effective.
Note: The Cut Sheet Selection
command (//S//) changes the paper
source to the paper table and waits
for manual insertion of a cut sheet.
5-41
Advertisement
Table of Contents
