Fujitsu DL3800 User Manual page 118

USING SETUP MODE
5-30
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Items
<PRT-DIR> BI-DIR
UNI-DIR
<BUZZER>
ON
OFF
<WORD-LG>
8 BIT
7 BIT
<BUFFER>
NONE
256BYTE
2KBYTE
8KBYTE
24KBYTE
32KBYTE
96KBYTE
128KBYT
Description
Bidirectional printing. The printer
prints in either direction while
seeking the next print direction for a
shorter print time.
Unidirectional printing.
Unidirectional printing is used for
printing vertical lines in tables even if
vertical alignment is not adjusted.
Unidirectional printing is slower than
bidirectional printing.
Enables or disables the printer status
buzzer.
Buzzer on (recommended).
The printer beeps to indicate paper-
out or other conditions.
Buzzer off under any conditions.
To determine the required word
length, refer to your computer
documentation. Select 8-BIT to print
bit image graphics.
8-bit word length (used by most
computers)
7-bit word length (MSB = 0)
Assigns buffer memory to input data
and downloaded font data.
Print buffer Download buffer
0 byte 128K bytes
256 bytes 127.75K bytes
2K bytes 126K bytes
8K bytes 120K bytes
24K bytes 104K bytes
32K bytes 96K bytes
96K bytes 32K bytes
128K bytes 0K bytes
User's Manual