Defining Graph Display Preferences; Customizing The Overview Subtab Display - Dell PowerConnect W-Airwave User Manual

Figure 9 List with Export to CSV Selected
AWMS also enables CSV exporting of all report types. For more information, see
CSV" on

Defining Graph Display Preferences

Many of the graphs in AWMS are Flash-based, which allows you adjust the graph settings attributes, as shown in
Figure 10.
Figure 10 Flash Graphs on the Home > Overview Page
This Flash-enabled GUI allows for custom settings and adjustments, as follows:
Drag the slider at the bottom of the screen to move the scope of the graph between one year ago and the

current time.
Drag the slider between graphs to change the relative sizes of each.

Deselect checkboxes to change the data displayed on each graph. The button with green arrows refreshes data

on the graph.
The Show All link displays all of the available checkboxes supporting the Flash graphs.

Once a change to the slider bars or to the display boxes has been made, the same change can be applied to all

other Flash graphs with an apply button (appears on mouse-over only).
For non-Flash graphs, select the graph to open a popup window that shows historical data.

A non-Flash version of the AWMS user page is available if desired; instead of Flash it uses the RRD graphs that
were used in earlier versions of AWMS. Contact Dell support for more information on activating this feature in
the AWMS database.

Customizing the Overview Subtab Display

You can rearrange or remove widgets appearing on the Home > Overview dashboard by selecting Customize to
the right of this window, as shown in
Figure 11 Customize Button on the Home > Overview Page
The Customize workspace is shown in
32 | Configuring AWMS
page 246.
Figure 11.
Figure 12.
"Exporting Reports to XML or
Dell PowerConnect W AirWave 7.2 | User Guide