Inserting Points; Deleting Points - Brother PEDESIGN 5.0 Instruction Manual

4
Drag the cursor to a new position. All the selected points move in the same direction.
Holding down the
NOTE:
Pressing the up, down, left, or right arrow keys will move the point one grid space each time the
key is pressed. If the grid is not displayed, the point moves the distance of the smallest grid space
in the direction shown on the key.
When in Motif Mode, if you move the start point (blue rectangle) or the end point (red rectangle) up
or down, the other point will automatically move up or down. Also, the start and end points can not
be moved closer than a certain fixed distance.
I

Inserting points

1
Click on the Tool Box. The shape of the cursor changes to
2
Click the broken line that you want to edit. You can only select one broken line at a time.
The existing points of the selected broken line are marked with small empty squares.
3
Click where you want to insert a new point on the broken line.
A new point appears, marked by a filled black square. The new point can be edited.
I

Deleting points

1
Click on the Tool Box. The shape of the cursor changes to
Work page.
2
Click the broken line that you want to edit. You can only select one broken line at a time.
The existing points of the broken line are marked with small empty squares.
3
Click the point that you want to delete.
To select an additional point, click that point while holding the
The selected points are marked by filled squares.
4
Press the
Delete
If the point is composed of a single line, the line is deleted.
NOTE:
When in Motif Mode, the start point (blue rectangle) and end point (red rectangle) can not be deleted.
236
Shift key while dragging the point moves the point horizontally or vertically.
key to remove the selected points from the outline.
.
when you move it over the
key down.
Shift