Brother PEDESIGN 5.0 Instruction Manual page 202

3
In the Gray Balance dialog, click
one shown below.
Sewing Option:
Line Interval
Max. Density
Use Color:
Specifies the color of thread used to create the embroidery data.
The default setting is the darkest color in the current thread chart.
Change Color
4
Click in the Photo Stitch Parameters dialog to display a Preview dialog similar to the one
Next
shown on page 195.
194
to display the Photo Stitch Parameters dialog similar to the
Next
Specifies the interval of parallel lines used to create embroidery data.
Range: 1.2 - 5 mm (0.05 - 0.2 inch)
Default: 2 mm (0.08 inch)
Specifies the maximum density for areas of the created embroidery data
sewn with the zigzag stitch. The embroidery data will be created with a
density smaller than that set here.
Range: 2.5 - 5 lines per mm (64 - 127 lines per inch)
Default: 3 lines per mm (76 lines per inch)
Click this button to open the Thread Color dialog, which lets you change
the thread color used in the embroidery data.
N Specify the settings for creating Photo Stitch
data.
N Click
to return to the previous dia-
Previous
log.
N Click
to apply the settings to the Photo
Next
Stitch data, and display the next dialog.
N Click
to close this dialog.
Cancel
Line interval