Patterns are created and edited using the Tool Box and the Sewing Attributes bar.
Clicking a button of the Tool Box changes the cursor mode and shape. The left side of the Status bar tells
you what you can do in each cursor mode.
Sets the cursor in selection mode. When you start the application, the selec-
tion mode is active by default. Cursor shape:
Sets the cursor in point edit mode.
Cursor shape:
Sets the cursor in zoom mode.
Cursor shape:
Sets the cursor in text input mode.
Cursor shape:
Sets the cursor in circle and arc drawing mode.
Cursor shape:
Sets the cursor in rectangle drawing mode.
Cursor shape:
Sets the cursor in outline drawing mode.
Cursor shape:
Sets the cursor in manual punching mode.
Cursor shape:
Sets the cursor in measure mode.
Cursor shape:
116
Using the Tool Box
or
with a miniature of the tool button
with a miniature of the tool button
with a miniature of the tool button
with a miniature of the tool button
with a miniature of the tool button
page 117
page 120
page 125
page 127
page 129
page 131
page 132
page 133
page 135