Table of Contents
Advertisement
2
When you click
Note that all the colors that you selected and turned on are converted to black. It is recommended
to select just as many colors as necessary to have a good outline of the image. In the above exam-
ple, a single color was selected.
In Stage 2, you can edit the image using the pens and erasers and use the zooming tools.
Note that if you do not like the result, you can go back to Stage 1 and select different colors.
See also:
I
To Figure Handle
Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click
, then
Stage
If you were in Stage 4, a message warns you that may lose some data if you go back to Stage 3. If
you want to make sure no data is lost, click
wise, click
and you are returned to Stage 3.
OK
If you were in Stage 2, this dialog displays.
110
, the black and white image is displayed and you are in Stage 2.
OK
"To Original Image" on page 108, "To Figure Handle" below and "To Sew Setting"
on page 112
Moves to Stage 3.
No shortcut key for this function
.
To Figure Handle
in that dialog and save your settings. Other-
Cancel
N Set the resolution. For details, see the following
table.
N Set the thinning process. For details, see the
following table.
N Set the size as a percentage of the original using
the
slider (setting range: 25% - 400 %). You
SIZE
will not be able to enlarge the image beyond the
limits of the Design Page area. If necessary, set
the Design Page size by clicking
and selecting one of the two other
Property
Design Page sizes in the dialog that opens.
•
The preview window reflects the setting
changes you make.
Design Page
Advertisement
Table of Contents
