Transferring The Data To A Card; Saving The File - Brother PEDESIGN 5.0 Instruction Manual

Step 17

Transferring the Data to a Card

Before you can actually sew your embroidery pattern, you must transfer it to an Original card.
1
Insert an Original card in the module.
2
Click on the menu bar, then click
File
You can also click on the button of the Toolbar shown below:
This dialog will display.
If the card module is not correctly connected or powered, if the card is not inserted or is defective,
you will see an error message. Refer to "Write to Card – Current Design" on page 157 for more
details.
Step 18

Saving the File

Before quitting the application, you should save your file on disk to be able to retrieve it later.
1
Click on the menu bar, then click
File
You can also click on the button of the Toolbar shown below:
If the file already exists on the disk (the file has been saved at least once), the file is saved imme-
diately.
2
If the file name is still
application will ask you to enter a file name and select a target folder.
If the new file name already exists, this dialog will appear:
The new file name displays in the title bar of the Layout & Editing window.
Write to Card
on the submenu.
Save
or if, for any other reason, the file cannot be found on the disk, the
Untitled
on the submenu.
N If the card is not brand new, make sure
that you want to erase the data that is
already stored on the card and click
.
OK
N Click
to exit.
Cancel
N Select the drive, the folder and type the
file name.
N Click
to save.
Save
N Click
Cancel
N Click
to overwrite.
Yes
N Click
if you do not want to overwrite
No
the existing file. You can then enter
another file name.
to exit.
49