Optimize Entry/Exit Points - Brother PEDESIGN 5.0 Instruction Manual

I

Optimize Entry/Exit points

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
Sew Optimize Entry/Exit points
This setting can be turned on or off. A check mark appears when this setting is turned on; no
check mark is displayed when this setting is turned off.
When the
Optimize Entry/Exit points
The entry points and exit points for the sewing data of connected objects with the same color are
optimized (connected with the shortest distance possible).
•
Objects that can be optimized are data created with the Circle, Rectangle and Outline tools.
•
When the
Optimize Entry/Exit points
be changed with the entry/exit point edit tool.
When the
Optimize Entry/Exit points
The entry points and exit points are not optimized. If the
changed from on to off, the last entry point and exit point positions are maintained. In addition, the
positions of the entry points and the exit points can be manually changed with the entry/exit point
edit tool.
Optimize Entry/Exit points
218
Optimizes the positions of the entry points and the exit points for the sewing data
No shortcut key for this function
No button for this function
setting is turned on:
setting is turned on, the entry point and the exit point cannot
setting is turned off:
turned off
.
Optimize Entry/Exit points
Optimize Entry/Exit points
setting is
turned on