Align - Brother PEDESIGN 5.0 Instruction Manual

I

Align

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Select the patterns which you want to Align.
2
Click , then
Edit Align
to align the patterns.
The selected patterns are aligned as shown below.
3
To choose a different alignment, click
Left
Text on a path:
Text on a path can be aligned by selecting other objects on the design page as well as the text, the
path, or both the text and the path. Each selected pattern is aligned on its outline. In order to align
with object(s) on the design page all the object(s) must be selected with text and/or path.
NOTE:
Refer to index for related topics, if necessary.
1. Text is selected
Objects set for hole sewing:
If just the inside of a pattern is selected, the pattern is aligned on the outline of the inside area. If the
outside of the pattern is also selected, the pattern is aligned on the outline of the outside area. In
order to align with object(s) on the design page all the object(s) must be selected.
Aligns the selected patterns as indicated.
No shortcut key for this function
No button for this function
, then ,
Left Center
Undo
Center
2. Path is selected
, , , , or
Right Top Middle
and repeat 2.
Top
Middle
Bottom
Right
, depending on how you wish
Bottom
3. Both the text and path
are selected
173