Stitch - Brother PEDESIGN 5.0 Instruction Manual

4
Bring the
APPLIQUE POSITION
oval (using the grid can make this operation easier). You can confirm the appliqué posi-
MATERIAL
tion using the preview function (see "Preview" on page 220).
5
Add details as you would with a normal embroidery picture.
When sewing, proceed as follows:
1
Place the appliqué material on the machine and start sewing. At this step, only the
outline will be sewn.
MATERIAL
2
Remove the appliqué material from the machine and cut along the outline.
3
Place the backing material on the machine and start sewing. At this step, only the
outline will be sewn.
TION
4
Affix the appliqué on the marked position with a small amount of fabric glue.
5
Restart sewing. At this step, the APPLIQUE outline will be sewn.
6
Sew the other details of the picture.
Note that the sewing order will be
I

Stitch

Purpose:
Available:
Operation:
1
Click the sew type selector.
The available options display.
For outlines, Zigzag Stitch, Running Stitch and Motif Stitch are available.
For regions, Satin Stitch, Fill Stitch, Programmable Fill Stitch, Motif Stitch and Cross Stitch are avail-
able.
146
oval and the
APPLIQUE MATERIAL / APPLIQUE POSITION / APPLIQUE
APPLIQUE MATERIAL / APPLIQUE POSITION / APPLIQUE
MATERIAL → POSITION → APPLIQUE
Sets the stitch for outline, region inside, text, manual punching pattern and
imported pattern (after the Stitch to Block function has been applied).
When the cursor is in the selection mode, the Line sew type and Region sew type
selectors are displayed (if they have not been turned off with the Line sew or
Region sew buttons).
When you start one of the drawing modes or select an existing pattern, the sew
type button for that pattern appears.
When you are in the text or manual punching mode or after applying a Stitch to
block setting to an imported pattern.
oval at the same position as the
APPLIQUE APPLIQUE
APPLIQUE
APPLIQUE POSI-
.