Table of Contents
Advertisement
In addition, the names and samples of installed TrueType fonts appear after the fonts listed in the table above.
If one of these TrueType fonts are selected, the font data is automatically converted to embroidery data.
Font settings can be changed in the
ing
Text - TrueType Font Attribute Setting
NOTE:
Some TrueType fonts may not convert well into beautiful embroidery data due to their design and
shape.
See also:
I
Text size
Purpose:
Available:
Operation:
1
Type the desired value in the Text size selector (5 - 100 mm or 0.20 - 3.93 inches) and press the
key
Enter
or click on the Text size selector to display the available values.
2
Click the desired value.
The setting applies to all the text patterns that you will create in the Text Input mode until you
change the setting.
If a text pattern or characters of a text pattern are selected, the setting also applies to the selec-
tion.
See also:
140
TrueType Font Attribute Setting
.
"Text Input Mode" on page 127, "Point Edit Mode" on page 120, "TrueType Font
Attribute Setting" on page 202
Selects the size for text.
When you click
on the Tool Box to start the Text Input mode.
When you select existing text patterns with the cursor in Selection mode.
When you select characters with the cursor in Point Edit mode.
"Text Input Mode" on page 127, "Point Edit Mode" on page 120
dialog, which is displayed by click-
Advertisement
Table of Contents
