Input - From Portrait - Brother PEDESIGN 5.0 Instruction Manual

Operation:
1
Check that the scanner or other device is correctly connected.
2
Click , then
Image
The driver interface set in the
Operate that interface, make the settings for importing an image, and import the image.
NOTE:
For information on using the interface, see the help manual for that interface, or contact the manu-
facturers of the interface.
3
When the image transfer between the scanner (or other device) and the driver is complete, the
imported image will be pasted in Design Page.
If the current image is not saved, you will be asked whether you want to save it.
NOTE:
TWAIN is an application interface (API) standardization for software controlling scanners, etc.
Also, the software itself is called TWAIN.
This software supports TWAIN standardized devices, so you can control the scanner and import
the image directly.
Before using this function, you must go to the
I
Input – from Portrait
Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
Image
A dialog similar to the one shown below appears.
, then
Input from TWAIN device
Select TWAIN device
Combine images of facial features that are built in to the program to create an
original portrait.
No shortcut key for this function
No button for this function
, then
Input from Portrait
.
dialog is displayed.
N Click
to save the image.
OK
N Click
to finish without saving the image.
Cancel
Select TWAIN device
.
dialog to select a TWAIN device.
177