Table of Contents
Advertisement
5
Move the cursor (without dragging) to the end point of the arc & string and click.
Click at start point
Rectangle Drawing Mode
With the rectangle drawing mode, you can create rectangles (boxes) with sharp or rounded corners. A
box will automatically have an outline and a region inside that can independently be assigned different
sewing attributes.
I
Drawing a box
1
Click
on the Tool Box.
The shape of the cursor changes to
Sewing Attributes bar now looks like this:
You can set the edge radius, colors and stitches at this step or after creating the pattern. See
"Edge radius" on page 137, "Color" on page 144 and "Stitch" on page 146.
You can also set the sewing attributes using the
page 204).
2
Move the mouse to a point, click and drag the mouse.
The point where you start dragging is considered a corner of the box. The point where you release
the mouse will be the diagonally opposed corner of the box.
Note that you can draw a perfect square by holding the
mouse.
Outline Drawing Mode
The outline drawing mode allows you to add lines and curves to your pattern.
If the pattern is open, it will end at the last point entered. Since this type of pattern does not have an
inside region, it is considered a simple outline when setting the stitch and color.
If the pattern is closed, the last point will be automatically joined with the first one. Since this type of pat-
tern has an outline and an inside region, each part can be assigned different stitches and colors. How-
ever, if the line of the pattern crosses itself, the inside region cannot be determined.
While creating the pattern, you can freely switch between drawing straight lines or curves.
Furthermore, if an image is used as a template, there is a tool that automatically extracts the image
boundary.
Move to end point
and displays together with a small rounded box. The
Sew
Click at end point
menu (see "Sewing Attribute Setting" on
key down while dragging the
Shift
131
Advertisement
Table of Contents
