Select Twain Device; Input From Twain Device - Brother PEDESIGN 5.0 Instruction Manual

I

Select TWAIN device

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
File Select TWAIN device
A dialog similar to this will display.
From the devices in the display, select which device to use and highlight that device.
NOTE:
If there is no TWAIN device installed, there will be no names displayed on the Sources list.
Use this function after installing the driver software for the TWAIN device you want to use.
See also:
I

Input from TWAIN device

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Check that the scanner or other device is correctly connected.
2
Click , then
File Input from TWAIN device
The driver interface set in the
Operate that interface, make the settings for importing an image, and import the image.
NOTE:
For information on using the interface, see the help manual for that interface, or contact the manu-
facturers of the interface.
86
Selects which TWAIN device installed in the computer to use.
No shortcut key for this function
No button for this function
.
"Input from TWAIN device" below
Operates a TWAIN standardized scanner or other device to import an image.
No shortcut key for this function
No button for this function
Select TWAIN device
N Click
device and close the dialog.
N Click
done to change the device and close
the dialog.
.
dialog is displayed.
to choose the selected
Select
to ignore the operation
Cancel