Numerical Setting-Rotate; Select All - Brother PEDESIGN 5.0 Instruction Manual

NOTE:
The maximum value that can be entered is the largest value that will not allow the pattern to
exceed the size of the Design Page.
The minimum value is 1 mm (0.04 inch).
See also:
I

Numerical Setting-Rotate

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Select one or more patterns. (Stage 3 only)
2
Click , then
Edit Numerical Setting
The dialog appears.
Rotate
NOTE:
The range of values that can be entered is between 0 and 359 degrees, in 1-degree increments.
I

Select All

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
Edit Select All
"Select System Unit" on page 107
Rotates the selected pattern numerically.
No shortcut key for this function.
No button for this function.
, then
Selects all the data.
Ctrl + E
No button for this function
(Stage 3 only).
.
Rotate
N The desired rotation angle can be
entered by either typing in a value or
clicking the arrows to select the desired
value.
Select
unchanged.
N Click
N Click
rotated the specified angle in the
Design Page.
N Click
changes.
to leave the pattern
0 degree
to confirm.
OK
to view the pattern
Preview
to exit without making any
Cancel
95