Save; Save As - Brother PEDESIGN 5.0 Instruction Manual

I

Save

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
File Save
If the file already exists on the disk (the file has been saved at least once during the same stage as
the current one), the file is saved immediately.
2
If the file name is still
application automatically switches to
See also:
I

Save As

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
File Save As
A dialog similar to this will display.
Save As
Stage1 image data can only be saved as a Bitmap file (*.bmp).
From Stage 2 to 4, black and white data can be saved as a PEL file, and pattern data can be
saved as a PEM file.
Saves your Design Page on the disk as latest Version file (default).
Ctrl + S
.
or if, for any other reason, the file cannot be found on the disk, the
Untitled
Save As
"Save As" below
Saves the current file under a new file name.
Savable files are: in Stage 1, Bitmap files (*.bmp); in Stage 2, PEL files; and in
Stage 3 and 4, PEL and PEM files.
No shortcut key for this function
No button for this function
.
.
N Select the drive, the folder and type the
file name.
•
The correct extension is automatically
set.
N Click
Save
N Click
Cancel
to save.
to exit.
89