Sew Setting Stage - Brother PE-Design 8.0 Instruction Manual

2
While holding down the
selected point to the other point that you want
to connect to it.
→ The shape of the pointer changes to
and a red square appears when the two
points are overlapping.
3
Release the mouse button to connect the two
points.
■
Continuing to the Sew Setting
Stage
When the figure handle image is finished, continue
to stage 4.
1
Click , or click Stage, then To Sew Setting.
b
Memo:
Even after continuing to the Sew Setting
Stage, you can return to the Figure Handle
Stage to edit the figure handle image.
150
Basic Design Center Operations
Alt key, drag the
,
Step 4

Sew Setting Stage

We are now going to apply sewing attributes to the
different parts of the outline to create the embroidery
pattern.
■
Using the Reference Window
This allows you to select colors while checking the
colors in the original image.
1
Click .
2
Click the Image tab.
→ The image opened in stage 1 appears.
b
Memo:
If Reference has been clicked, click Original.
■
Specifying sewing attributes
To specify sewing attributes, first select the color
and sew type, and then click the line or region where
the sewing attributes are to be applied.
1
Click , or
: Click this button to apply sewing
attributes to the entire outline.
: Click this button to apply sewing
attributes to a portion of the outline.
: Click this button to apply sewing
attributes to a region.
→ The Sewing Attributes bar appears as
shown below.
For or
Line sew type selector
.