Write To Card - Other Pes Files - Brother PEDESIGN 5.0 Instruction Manual

2
If you click , your current embroidery patterns will be saved on the card. A
OK
displays while the data is being transferred to the card.
After a while, the following message will appear.
See also:
I
Write to Card – Other PES files
Purpose:
Shortcut key:
Toolbar:
Operation:
1
Click , then
File Write to Card
This following dialog appears.
[A]
N Click
to display the information (size, number of stitches, and colors) for the pattern selected
in the Available patterns list or the Selected patterns list. This is available only if one pattern is
selected.
N Click
to display a three-dimensional image of the pattern selected in the Available patterns
list or the Selected patterns list.
N
N The Available patterns list [A] displays the images of the pattern files (.pes) saved in the folder
selected after clicking
•
Patterns that are either too large or have too many stitches for the embroidery hoop size, selected
with the Hoop size selector, are crossed out with a red
158
"Save" and "Save As" on page 156
Writes multiple PES files to an original card at the same time.
Shift + F4
No button for this function
, then
Other PES files
[B]
shows the capacity of the patterns selected in the Selected patterns list.
. The name of the file appears below the image.
N Click
.
OK
.
N Use
the size of the embroidery hoop that can be
used with your embroidery machine.
NOTE:
Do not select a hoop size larger than the
embroidery hoop that can be used with
your embroidery machine. Otherwise, the
created card will not work correctly with
the embroidery machine.
N Click
, and then select the folder
where the pattern file (.pes) is saved.
N Click
to switch between the large
and small display size of the pattern
images shown in the lists.
.
message
Now writing
to select