Mode Menu; Fill Mode - Brother PEDESIGN 5.0 Instruction Manual

Mode Menu

You can use Programmable Stitch Creator to create patterns for Programmable Fill, and patterns for
Motif Fill or Motif Line. However, the method and Work Area are different for each. Use this mode
menu to make the setting for which pattern you will create.
Purpose:
Shortcut key:
Toolbar:
Operation:
1
From the menu, click
N Click
: the mode changes to create a pattern for Programmable Fill.
Fill
N Click
: the mode changes to create a pattern for Motif.
Motif
2
If the current work area is edited, you will be asked whether you want to save the changes, for
example:

Fill Mode

In Fill Mode, you can make a pattern out of one line or many lines.
In the tool box, there is a selection mode tool, a point edit mode tool, and a line drawing mode tool.
Using these tools, you can freely input and edit lines in the Work Area to create your pattern.
The sewing method for Programmable Fill is different from the regular Fill, where the thread is con-
stantly sewn in a set direction. Instead, the pattern will be sewn in such a way that the needle drops
directly over the created pattern.
242
Changes the Mode for creating data.
No shortcut key for this function.
No button for this function
, then select the heading that matches the pattern you want to create.
Mode
N Click
to save the work area Page
Yes
first.
N Click
to abandon the work area.
No
N Click
to do anything else (for
Cancel
example, modify the current Design
Page or saving it with another file
name).
(Example of a pattern)