Intel E5205 - Cpu Xeon 1.86Ghz Fsb1066Mhz 6M Lga771 Dual Core Tray Datasheet page 12

mounted on a pinless substrate with 771 lands, and includes an integrated heat
spreader (IHS).
• LGA771 socket – The Dual-Core Intel® Xeon® Processor 5200 Series interfaces
to the baseboard through this surface mount, 771 Land socket. See the LGA771
Socket Design Guidelines for details regarding this socket.
• Processor core – Processor core with integrated L1 cache. L2 cache and system
bus interface are shared between the two cores on the die. All AC timing and signal
integrity specifications are at the pads of the system bus interface.
• Front Side Bus (FSB) – The electrical interface that connects the processor to the
chipset. Also referred to as the processor system bus or the system bus. All
memory and I/O transactions, as well as interrupt messages, pass between the
processor and chipset over the FSB.
• Dual Independent Bus (DIB) – A front side bus architecture with one processor
on each of several processor buses, rather than a processor bus shared between
two processor agents. The DIB architecture provides improved performance by
allowing increased FSB speeds and bandwidth.
• Flexible Motherboard Guidelines (FMB) – Estimate of the maximum values the
Dual-Core Intel® Xeon® Processor 5200 Series will have over certain time periods.
Actual specifications for future processors may differ.
• Functional Operation – Refers to the normal operating conditions in which all
processor specifications, including DC, AC, FSB, signal quality, mechanical and
thermal are satisfied.
• Storage Conditions – Refers to a non-operational state. The processor may be
installed in a platform, in a tray, or loose. Processors may be sealed in packaging or
exposed to free air. Under these conditions, processor lands should not be
connected to any supply voltages, have any I/Os biased or receive any clocks.
Upon exposure to "free air" (that is, unsealed packaging or a device removed from
packaging material) the processor must be handled in accordance with moisture
sensitivity labeling (MSL) as indicated on the packaging material.
• Priority Agent – The priority agent is the host bridge to the processor and is
typically known as the chipset.
• Symmetric Agent – A symmetric agent is a processor which shares the same I/O
subsystem and memory array, and runs the same operating system as another
processor in a system. Systems using symmetric agents are known as Symmetric
Multiprocessing (SMP) systems.
• Integrated Heat Spreader (IHS) – A component of the processor package used
to enhance the thermal performance of the package. Component thermal solutions
interface with the processor at the IHS surface.
• Thermal Design Power (TDP) – Processor thermal solutions should be designed
to meet this target. It is the highest expected sustainable power while running
known power intensive applications. TDP is not the maximum power that the
processor can dissipate.
• Intel
the processor to execute operating systems and applications written to take
advantage of the 64-bit extension technology.
• Enhanced Intel SpeedStep
management capabilities to servers and workstations.
• Platform Environment Control Interface (PECI) – A proprietary one-wire bus
interface that provides a communication channel between Intel processor and
external thermal monitoring devices, for use in fan speed control. PECI
12
®
64 Architecture – An enhancement to Intel's IA-32 architecture that allows
®
Technology – Technology that provides power