Regular Printing Is Selected, But A Roll Is Loaded; Paper Jam; Paper Is Crooked; Push The Release Lever Back - Canon imagePROGRAF iPF760 User Manual

iPF760

Regular printing is selected, but a roll is loaded.

Regular printing is selected, but a roll is loaded.
Cause
A print job for printing on
sheets was sent when a roll
is loaded.

Paper jam

Paper jam

"Push the release lever back."

Cause
A paper jam occurred
1.
in the printer during
printing.
2.
3.
4.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
"Manually rewind the roll all the way and press OK."
Cause
A paper jam occurred 1.
when advancing the
2.
paper.
3.
(See "Loading Rolls in the Printer.")

Paper is crooked.

Paper is crooked.
Paper loaded crooked was detected when the paper was advanced.
User's Guide
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified in the printer
driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Push the Release Lever back and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Load the paper.
Pull the Release Lever forward.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
Load the paper.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK but-
ton.
Printing will resume, starting from the page on which the error occurred.
Cause
Corrective Action
→P.447
→P.24
Corrective Action
→P.604
→P.607
→P.442
→P.461
Corrective Action
→P.442
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel to the orange Paper
Alignment Line.
3.
Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, remove the Roll Holder from
the printer, push the roll firmly in until it touches the Roll Holder flange,
and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
Follow these step to reload a sheet.
Regular printing is selected, but a roll is loaded.
Corrective Action
→P.442
→P.439
639