When Using An Ipv6 Ip Address - Canon imagePROGRAF iPF760 User Manual

Configuring the Printer's TCP/IP Network Settings With RemoteUI
Item
Enable DNS Dynamic
Update
Use Zeroconf Function
IP Address
Subnet Mask
Gateway Address
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
RAW Mode Bi-direc-
tion
FTP Printing
Use Discovery
Scope
SMTP Server Address
Primary DNS Server
Address
Secondary DNS Server
Address
DNS Host Name
DNS Domain Name
Multicast DNS Service
Name
7
Click OK to display the Network page.
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports such protocol
running in the network.
Note
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method is used
first. If you cannot obtain the IP address, the address specified in IP Address is used.
•
It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing check boxes
of options you will not use.
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers and DNS
domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name, respectively.

When using an IPv6 IP address

532 1
Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
Activate this setting to perform DNS server registration automatically.
Activate this setting to use Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask.
Specify the printer's default gateway.
Activate this setting to use LDP Printing.
Activate this setting to use IPP Printing.
Specify the URI of the printer used for IPP printing using up to 252 characters.
Activate this setting to use Raw Printing.
Activate this setting to use Raw mode bidirectional communication.
Activate this setting to use FTP Printing.
Activate this setting to use SLP Discovery function.
Enter the SLP search range.
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Specify the printer host name, up to 63 characters (1–63 characters). Use single-
byte letters, numbers, and - (hyphens). Do not use numbers or - for the first char-
acter or - for the last character.
Specify the printer domain name, up to 63 characters. Use single-byte letters,
numbers, - (hyphens), and . (periods). Do not use numbers, -, or . for the first
character, or - or . for the last character.
Specify the printer's Multicast DNS service name. (1–63 characters)
This name will be displayed when Bonjour functions are used.
Details
iPF760
Default Setting
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
On
On
printer
On
Off
On
On
default
0.0.0.0
0.0.0.0
0.0.0.0
NB-18GBipxxxxxx
blank
Canon iPFxxxx
(xxxxxx)
User's Guide