Canon imagePROGRAF iPF760 User Manual page 498

Menu Settings
Test Nozzle Check
Print
Status Print
Interface Print
GL2 Set Print
Paper Details
Print Job Log
Menu Map
Color Palette
Adjust Head
Printer Posi.
Adj.
Head Inc. Adj.
Feed Pri-
ority
498
Setting Item
Auto(Standard)
Auto(Advanced)
Manual
Adj. Pri- Automatic
ority
Print Quality
Print Length
Adj. Auto(GenuinePpr)
Quality
Auto(OtherPaper)
Manual
Description, Instructions
Print a test pattern to check the nozzles.
Print information about the printer.
Print interface settings information.
Print GL2 settings information.
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type and size,
amount of ink consumed, and so on. Ink consumption indicates
a rough estimate of how much ink was consumed per page.
( *1 )
Print the menu structure.
Print the GL2 color palette.
The printer prints and reads a test pattern for automatic adjust-
ment of Printhead alignment relative to the printing direction.
(See "Automatic Adjustment to Straighten Lines and Colors
(Head Posi. Adj.).")
→P.552
The printer prints and reads a test pattern for automatic adjust-
ment of Printhead alignment relative to the printing direction
and spacing between nozzles and colors. (See "Automatic Ad-
justment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.552
Print a test pattern for adjustment of Printhead alignment rela-
tive to the printing direction. Enter the adjustment value man-
ually based on the resulting pattern. (See "Manual Adjustment
to Straighten Lines and Colors (Head Posi. Adj.).")
Print a test pattern for adjustment of the Printhead orientation.
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
Specify exact paper feeding, if desired. Normally, select Auto-
matic. Choose Print Quality for attractive printing. Choosing
Print Quality also makes banding less noticeable. Choose
Print Length if you prefer to feed the paper an exact amount.
However, note that slight banding may occur in the direction of
carriage scanning when Print Length is selected.
Specify this mode with paper identified in the Paper Reference
Guide.
The printer prints and reads a test pattern for automatic adjust-
ment of the feed amount. (See "Automatic Banding Adjustment
(Adj. Quality).")
→P.560
Specify this mode with paper not in the Paper Reference
Guide.
The printer prints and reads a test pattern for automatic adjust-
ment of the feed amount. Note that this function takes more
time and consumes more ink than Auto(GenuinePpr). (See
"Automatic Banding Adjustment (Adj. Quality).")
Use this mode with highly transparent media or other paper for
which Auto(GenuinePpr) or Auto(OtherPaper) cannot be
used.
Print a test pattern for adjustment of the feed amount based on
the type of paper. (See "Manual Banding Adjustment (Adj.
Quality).")
→P.561
iPF760
→P.553
→P.555
→P.560
User's Guide