Specifying Netware Print Services - Canon imagePROGRAF iPF760 User Manual

iPF760
3
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4
Press ▲ or ▼ to select NetWare, and then press the OK button.
5
Press ▲ or ▼ to select NetWare, and then press the OK button.
6
Press ▲ or ▼ to select On, and then press the OK button.
The display reverts to the NetWare menu.
7
Press ▲ or ▼ to select Frame Type, and then press the OK button.
8
Press ▲ or ▼ to select the frame type to use, and then press the OK button.
The display reverts to the NetWare menu.
9
Press ▲ or ▼ to select Print Service, and then press the OK button.
10
Press ▲ or ▼ to select the desired print service, and then press the OK button.
The display reverts to the NetWare menu.
11
Press the Menu button.
If any of the settings is changed, a confirmation message is
displayed. In this case, press the OK button.
•
Be sure to complete step 11. This will activate the values you have entered.
Important
•
If an error message is displayed, check the settings and correct any invalid values.
•
To cancel this process, press the Stop button.
Note

Specifying NetWare Print Services

Specifying NetWare Print Services
Before printing in a NetWare network, you must configure print services such as print servers, print queues, and so on.
You can configure the print service settings from a computer using any of the following Novell software provided with
NetWare.
• NWADMIN
• PCONSOLE
•
If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client software) must be instal-
led as the client software application.
Important
•
NetWare networking is unsupported in Windows Vista, Windows Server 2008 and Windows 7.
This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depending on
the environment.
User's Guide
Specifying NetWare Print Services
537