Messages Regarding Hp-Gl/2; This Type Of Paper Is Not Compatible With Hp-Gl/2; Gl2: Wxxxx The Memory Is Full. (Xxxx Is 0501, 0903, Or 0904); Gl2: W0502 The Parameter Is Out Of Range - Canon imagePROGRAF iPF760 User Manual

iPF760

Messages regarding HP-GL/2

Messages regarding HP-GL/2

This type of paper is not compatible with HP-GL/2. .......................................................................................... 649

GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) .......................................................................... 649

GL2: W0502 The parameter is out of range. ...................................................................................................... 649

GL2: W0504 This command is not supported. .................................................................................................. 649

This type of paper is not compatible with HP-GL/2.
This type of paper is not compatible with HP-GL/2.
Cause
The printer has received a HP-GL/2 print job
that cannot be printed on the paper that has
been advanced.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause
The printer memory is full.
GL2: W0502 The parameter is out of range.
GL2: W0502 The parameter is out of range.
A parameter specified in a HP-GL/2 command is out of the supported range.
GL2: W0504 This command is not supported.
GL2: W0504 This command is not supported.
Cause
The printer has received an unsupported HP-GL/2 command.
User's Guide
Follow these steps to replace the type of paper in the printer.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Replace the paper with a type compatible with HP-GL/2. For details on paper compatible
with HP-GL/2, refer to the Paper Reference Guide. (See "Types of Paper.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note
that this error may cause paper jams and affect the printing quality.
Because the entire print job could not be received, the printer may not be able to print the entire original. Check the
printing results.
Cause
Corrective Action
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning > On in the
Control Panel menu, set it to Off instead.
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning > On in the Control Panel
menu, set it to Off instead.
This type of paper is not compatible with HP-GL/2.
→P.434
Corrective Action
649