Canon imagePROGRAF iPF760 User Manual page 444

Loading Rolls in the Printer
5
Holding the Roll Holder flange (a), guide the holder
along the Roll Loading Slots (b) on both ends, keeping
the holder level as you load it in the Roll Holder Slot.
•
Caution
•
•
6
Advance the roll to insert the leading edge in the Paper
Feed Slot (a) until you hear a tone.
Important
7
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the
barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")
444
ManageRemainRoll
Off
Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage the printer and
Roll Holder.
Do not release the flanges until the holder is loaded in the Roll Holder Slot.
Be careful not to pinch your fingers between the Roll Loading Slots (b) and the Roll Holder shaft (c) when loading
rolls.
•
Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing quality.
We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
•
If the paper is wrinkled or warped, straighten it out before loading it.
• Load paper straight so it is not fed askew.
Barcodes
Printed A menu for selection of the type of paper is automatically shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Not printed
Printer Operation After the Paper is Fed
iPF760
→P.452
User's Guide