Canon imagePROGRAF iPF760 User Manual page 446

Changing the Type of Paper
•
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper loaded ( Roll Paper or Cut Sheet), and then press the OK button.
5
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
Important
•
Note
•
Using the Same Type of Paper Regularly
Configure this setting so that current media type settings will be automatically selected when you load the same type of
paper later.
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Paper tab (
•
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.
4
Press ▲ or ▼ to select On, and then press the OK button.
•
The specified media type setting is updated in the following situations.
•
Note
When using sheets, if you send a print job before loading a sheet, the media type setting is updated to match the type of
paper specified by the print job.
•
When you have selected ManageRemainRoll > On on the Control Panel and a barcode is printed on the roll, the media
type setting is updated to match the type of paper specified by the barcode.
446
•
To change the media type setting, see "Changing the Type of Paper."
If the Tab Selection screen is not displayed, press the Menu button.
•
Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause feed errors
and affect printing quality.
For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.")
Paper is selected.
If you move the Release Lever, the setting automatically reverts to the previously selected paper.
).
If the Tab Selection screen is not displayed, press the Menu button.
→P.434
→P.445
iPF760
By default, Plain
User's Guide