The Length Of Printed Images Is Inaccurate In The Feeding Direction; Images Are Printed Crooked; Documents Are Printed In Monochrome; Line Thickness Is Not Uniform - Canon imagePROGRAF iPF760 User Manual

The length of printed images is inaccurate in the feeding direction

The type of paper specified in the printer driver
does not match the type loaded in the printer.
The length of printed images is inaccurate in the feeding direction The length of printed images is inaccurate in the feeding direction
In the Control Panel menu, Adj. Priority is set to
Print Quality.
The type of paper specified in the printer driver
does not match the type loaded in the printer.

Images are printed crooked

Images are printed crooked
In the Control Panel menu, Skew Check Lv. is set to Loose or Off.
In the Control Panel menu, Width Detection is set to Off.

Documents are printed in monochrome

Documents are printed in monochrome
In the Advanced Settings of the printer driver, Mono-
chrome, Monochrome (BK ink), or Monochrome Bitmap
is specified in Color Mode.
The Printhead nozzles are clogged.

Line thickness is not uniform

Line thickness is not uniform
Cause
In the Special Settings dialog box of the
Windows printer driver, Fast Graphic
Process is selected.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
618
Cause
2.
Cause
Set Adj. Priority to Print Length in the Control Panel menu, and then execute Adjust
Length.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1.
2.
Cause
Cause
Access the printer driver Properties dialog box from Print in the File menu of the source applica-
tion, and follow these steps to print.
1.
Clear the option Open Preview When Print Job Starts on the Main sheet.
2.
Clear the option Page Layout on the Layout sheet.
3.
Click the Special Settings button in the Layout sheet to open the Special Settings dialog
box, and remove the check from Fast Graphic Process.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have loaded in the print-
er.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Change the type of paper in the printer driver and try printing again.
Press the Stop button and stop printing.
Change the type of paper in the printer driver and try printing again.
In the Control Panel menu, set Skew Check Lv. to Standard.
Set Width Detection to On in the Control Panel menu.
In the Advanced Settings of the printer driver, specify Color in Color Mode and
try printing again.
Print a test pattern to check the color ink nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.")
Corrective Action
→P.442
→P.461
Corrective Action
Corrective Action
→P.559
→P.442
→P.461
Corrective Action
Corrective Action
→P.575
iPF760
User's Guide