Paper Position Not Suitable For Borderless Printing; Roll Paper Is Not Securely In Contact With Roll Holder - Canon imagePROGRAF iPF760 User Manual

Paper position not suitable for borderless printing.

Cause
The loaded paper is a size not compati-
ble with borderless printing.
Paper position not suitable for borderless printing.
Paper position not suitable for borderless printing.
Because paper expands or contracts de-
pending on the environment of use, it may
become narrower or wider than the suppor-
ted width for borderless printing.
The paper is loaded askew.

Roll paper is not securely in contact with roll holder.

Roll paper is not securely in contact with roll holder.
When the roll was loaded, the roll was not inserted firmly all the way on
the Roll Holder.
642
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See Paper Reference Guide .)
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Cause
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental conditions are met. For
details on environmental conditions for various paper, see the Paper Reference Guide.
(See Paper Reference Guide .)
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Fix Paper Position and straighten the paper so that the edges are be-
tween the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Cause
Corrective Action
Corrective Action
→P.439
Corrective Action
Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Attaching the Roll Holder to Rolls.")
3.
Load the Roll Holder in the printer.
iPF760
→P.439
User's Guide