Canon imagePROGRAF iPF760 User Manual page 596

Preparing to Transfer the Printer
5
Push all ink tank lock levers closed until they click into place.
6
Close the Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
Important
7
When the processing is complete, "Completed! Turn Power
Off!!" is displayed. Press the Power button to turn the power
off.
Pack the printer
1
Disconnect the power cord and interface cable.
Important
2
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
3
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
4
Disassemble and repackage the Stand by following the installation procedure in reverse.
5
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping
box.
596
•
Do not remove the Maintenance Cartridge during this process.
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and transfer it in
that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this procedure
again.
iPF760
User's Guide