Troubleshooting Paper Abrasion And Blurry Images (Head Height) - Canon imagePROGRAF iPF760 User Manual

Troubleshooting Paper Abrasion and Blurry Images (Head Height)

Troubleshooting Paper Abrasion and Blurry Images (Head Height) Troubleshooting Paper Abrasion and Blurry Images (Head Height)
If the Printhead rubs against paper during printing, adjusting the Printhead height may improve results.
If image edges are blurred, it may help to lower the Printhead.
•
Raise or lower the printhead, depending on the nature of the problem.
(See "Paper rubs against the Printhead.")
Note
(See "The edges of the paper are dirty.")
(See "Image edges are blurred or white banding occurs.")
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Paper tab (
•
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5
Press ▲ or ▼ to select Head Height, and then press the OK button.
6
Press ▲ or ▼ to select the desired setting value, and then press the OK button.
•
Note
558
).
If the Tab Selection screen is not displayed, press the Menu button.
Depending on the type of paper, some setting values may not be available.
→P.613
→P.614
→P.617
iPF760
User's Guide