Installing A Server Certificate From A Certificate Authority; Exporting Server Certificates; Peap Sample Configuration - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

Complete the form with the details for your certificate, and click Continue to proceed to Step 2.

Installing a Server Certificate from a Certificate Authority

The Install Server Certificate form is used to install a digital certificate you have obtained from a third-
party certificate authority. This certificate should correspond to a certificate signing request that you
previously created using the New Certificate Request form.
Select the certificate file and the certificate authority's root certificate, and click the
Certificate button.
Installing an Imported Server Certificate
In step 2, the details of the imported RADIUS server certificate and its issuer are shown, including the
certificate's validity period.
Select the Use this certificate to identify this RADIUS server check box and click the
Settings button to complete the import process and configure the EAP server certificate
.
After importing the certificate, the RADIUS server will need to be restarted to complete the changes.

Exporting Server Certificates

The Export Server Certificate form is used to export the RADIUS server's digital certificate, or the
certificate authority's root certificate, in several different formats.
Select one of these options to export a certificate file:
Server certificate and CA issuer certificate (PKCS#7) – use this option to download a file

containing the certificates for the CA and the server.
Server certificate chain including private key (PKCS#12) – use this option if you are backing up

the server's certificate, or moving it to another server. A passphrase is strongly recommended to protect
the private key.
Server certificate only – use this option to download just the RADIUS server's certificate, in either

PKCS#7, Base-64 encoded (PEM), or binary (DER) formats.
CA issuer certificate only – use this option to download the root certificate for the certificate

authority.

PEAP Sample Configuration

To enable the common case of PEAPv0/MS-CHAPv2 (broadly supported by all wireless clients that
implement 802.1X), follow the process described below:
1. Create or import a RADIUS server certificate. See
Certificate Authority"
2. Select the appropriate PEAP options in the EAP Configuration form, as shown below:
Amigopod 3.7 | Deployment Guide
and "Importing a Server Certificate"
"Creating a Server Certificate and Self-Signed
in this chapter for details.
Upload
Apply
RADIUS Services | 83