Configure Network Interfaces - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

The system hostname is a fully-qualified domain name. By default, this is set to amigopod.localdomain,
but you may specify another valid domain name.
A valid hostname is a domain name that contains two or more components separated by a period (.).
Hostname parameters are:
Each component of the hostname must not exceed 63 characters

The total length of the hostname must not exceed 255 characters

Only letters, numbers, and the hyphen (-) and period (.) characters are allowed

Hostnames may start with numbers, and may contain only numbers


Configure Network Interfaces

The Network Interfaces List lets you view details and configure settings for the system's network interfaces.
To open this page, choose Administrator > Network Setup > Network Interfaces.
The results of an automated network diagnostic test are displayed at the top of the page. For more details
about the network diagnostics, see
To change the configuration of a network interface, click the network interface's row in the list, then

click the
interfaces may be configured for automatic settings using DHCP or BOOTP, or can be manually
configured for an IP address. When you choose one of these settings from the Configuration drop-down
list, additional options are displayed.
Amigopod 3.7 | Deployment Guide
Automatic Network Diagnostics
Edit command. The row expands to provide configuration options. LAN and MGT network
in the Administrator Tasks chapter.
Setup Guide | 37