Configure Default Radius Nas Vendor Type - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

To ensure that authentication, authorization and accounting (AAA) is performed correctly, it is vital that the
server maintains the correct time of day at all times. It is strongly recommended that you configure one or
more NTP servers to automatically synchronize the server's time.
NTP can interfere with timekeeping in virtual machines. The default virtual machine configuration will automatically
synchronize its time with the host server, and so you should not configure NTP within the virtual machine.
However, make sure that the host is configured to keep its clock in sync with a suitable time source.
If available, it is recommended that you use an NTP server that is available on your local network. This will
improve timekeeping and will eliminate the need for additional Internet traffic for the time server.
To use a public NTP server, enter the following hostnames:
0.pool.ntp.org
1.pool.ntp.org
2.pool.ntp.org
You can also use NTP pool servers located in your region. For more information, refer to the NTP Pool
Project Web site:
Click the

Configure Default RADIUS NAS Vendor Type

If your deployment uses only one type of NAS, click the NAS Type drop-down list and select the default
NAS vendor type to use when defining RADIUS clients or creating RADIUS Web Login pages that have
vendor-specific settings.
Click the
Network Access Server List to continue with setup.
Amigopod 3.7 | Deployment Guide
http://www.pool.ntp.org
Save and Continue button to apply the server's time configuration and continue with setup.
Save and Continue button to apply the RADIUS server configuration, or click
.
Skip to
Setup Guide | 41