Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual page 388

Table 37 GuestManager Standard Fields (Continued)
Field
netmask
no_password
no_portal
no_warn_before
notes
num_accounts
password
password2
password_action
password_action_recur
388 | Reference
Description
String. Network address mask to use for stations using the account. This field may
be up to 20 characters in length. The value of this field is not currently used by the
system. However, a RADIUS user role may be configured to assign network masks
using this field by adding the Framed-IP-Netmask attribute, and setting the value for
the attribute to: <?= $user["netmask"]
Boolean. If set, prevents a user from changing their own password using the guest
self-service portal. Set this field to a non-zero value or a non-empty string to disable
guest-initiated password changes. The default is to allow guest-initiated password
changes, unless this field is set.
Boolean. If set, prevents a user from logging into the guest service portal. Set this
field to a non-zero value or a non-empty string to disable guest access to the self-
service portal. The default is to allow guest access to the self-service portal, unless
this field is set.
Boolean. User does not receive a logout expiration warning. The admin or user can
opt out of this option by setting the field to 1.
String. Comments or notes stored with the account. This field may be up to 255
characters in length.
Integer. The number of accounts to create when using the create_multi form. This
field controls account creation behavior; it is not stored with created visitor accounts.
String. Password for the account. This field may be up to 64 characters in length.
String. Password for the account. If this field is set, its value must match the value of
the password field for the account to be created or updated. This can be used to
verify that a password has been typed correctly. This field controls account creation
and modification behavior; it is not stored with created or modified visitor accounts.
String. Controls the password changing behavior for a guest account. This field may
be set to one of the following values:
 empty string – Default behavior; that is, guests are not required to change their
password
deny – Prevents the guest from changing their password

first – Requires the guest to change their password on their first login

 next – Requires the guest to change their password on their next login
 recur – Require the guest to change their password on a regular schedule (as
specified by the password_action_recur field)
 recur_next – Require the guest to change their password on their next (or first)
login, and then on a regular schedule (as specified by the password_action_recur
field)
If the guest is required to change their password, this will take place during a
network login, before the guest is redirected to the NAS for login. Guest password
changes are only supported for Web login pages and guest self-registration pages
that have the "Perform a local authentication check" option enabled.
The default behavior is to leave guest passwords under the control of the guest.
With the default behavior, guests are not prevented from changing their password,
but are also not required to change it on any particular schedule.
String. Specifies a date or relative time, after which a guest will be required to change
their password. Using this field also requires the password_action field to be set to
the value 'recur'. The value of this field should be a relative time measurement,
indicated with a plus sign; for example "+15 days" or "+2 months".
Amigopod 3.7 | Deployment Guide