Getusercurrentsession(); Getipaddresscurrentsession(); Getcallingstationcurrentsession() - Aruba Networks PowerConnect W Clearpass 100 Software Deployment Manual

'acctuniqueid' => 'c199b5a94ebf5184',
'username' => 'demo@example.com',
'realm' => '',
'role_name' => 'Guest',
'nasipaddress' => '192.168.2.20',
'nasportid' => '',
'nasporttype' => '',
'calledstationid' => '',
'callingstationid' => '',
'acctstarttime' => '1249258943',
'connectinfo_start' => '',
'acctstoptime' => NULL,
'connectinfo_stop' => NULL,
'acctsessiontime' => 0,
'acctinputoctets' => 0,
'acctoutputoctets' => 0,
'acctterminatecause' => NULL,
'servicetype' => '',
'framedipaddress' => '192.168.2.3',
'framedprotocol' => '',
'acctauthentic' => '',
'nastype' => 'cisco_3576',
'nas_name' => 'centos',
'total_traffic' => 0,
'state' => 'stale',
'traffic_input' => 0,
'traffic_output' => 0,
'traffic_usage' => 0,
'session_time' => 29641260,
)

GetUserCurrentSession()

GetUserCurrentSession($username)
Looks up the current (most recent) active session for the specified username.
See "GetCurrentSession()"

GetIpAddressCurrentSession()

GetIpAddressCurrentSession($ip_addr = null)
Looks up the current (most recent) active session for the specified client IP address. If ip_addr is not
specified, it defaults to the current value of $smarty.server.REMOTE_ADDR, which may not be the same
value as the IP address of the session if there is a NAT.
See "GetCurrentSession()"

GetCallingStationCurrentSession()

GetCallingStationCurrentSession($callingstationid, $mac_format = null)
Looks up the current (most recent) active session for the specified calling station ID.
Because different NAS equipment can send differently-formatted MAC addresses in the Calling-Station-Id
attribute, the $mac_format argument may be specified. This should be a sprintf-style format string that
accepts 6 arguments (the octets of the MAC address). The default if not specified is the IEEE 802 standard
format, %02X-%02X-%02X-%02X-%02X-%02X – that is, uppercase hexadecimal with each octet
separated with a hyphen.
See "GetCurrentSession()"
Amigopod 3.7 | Deployment Guide
for details of the return value.
for details of the return value.
for details of the return value.
Reference | 407